Power Automation Sweden AB

Cylindervägen 8
13152 Nacka Strand
Sweden
IL 9151

Level Sensing Relay

IL 9151

Contacts

Auxiliary voltage

Response value

Response and release delay

Approval

Variant

  • 0049135
  • IL9151.12 2-450K-OHM AC230V 0,2-20S
Level monitoring and control for conductive liquids and powders, e.g. maximum and minimum... more

Product description

  • Level monitoring and control for conductive liquids and powders, e.g. maximum
    and minimum filling levels, overfilling and protection against dry running
  • Monitoring and control of the mixing ratio of conductive liquids
  • General resistance monitoring tasks, e.g. limit temperature detection with PTC
  • Contact protection relay with time delay

Technical specifications

Width: 35 mm
Operate delay: +
Enclosure design: Distribution board
Output contacts: 2 x 1 Wechsler
Measuring range max.: 450 kΩ
Type: IL 9151

Features

  • According to IEC/EN 60 255-1
  • 3 probe connections for 2-point and 1-point level control
  • Also for use as moisture detector
  • High interference resistance of the Measuring Circuit,
    which is isolated from the mains
  • Max. wire length to the probes: 3000 m
  • Large setting range: 2 ... 450 kΩ this
    permits differentiation between fluid and foam
  • Separately adjustable response and release time delay
    0.2 ... 20 s for MIN- and MAX-level
  • Programmable for:
    - 2 separate controllable output relays for MIN and MAX level
    - common controlled output relays for 2-point hysteresis level control
    - open circuit operation
    - closed circuit operation
  • Measuring Circuit for probes works with internally generated AC voltage
    (approx. 30 Hz), electrolytic behaviour does not occur in the liquid
  • For auxiliary voltages of 24 ... 415 V AC or 24 V DC
  • LEDs for operation and state of contact
  • 2 changeover relays with 1 changeover contact each
  • IL 9151 and SL 9151 with safe separation according to
    IEC/EN 61 140, IEC/EN 60 947-1
  • Devices available in 3 enclosure versions:
    IL 9151: depth 59 mm, with terminals at the bottom for installation
    systems and industrial distribution systems according to DIN 43 880
    SL 9151, MK 9151N: depth 98 mm, with terminals at the top for
    cabinets with mounting plate and cable duct
  • IL/SL 9151: 35 mm width
    MK 9151N: 22.5 mm width