Power Automation Sweden AB

Cylindervägen 8
13152 Nacka Strand
Sweden
BH 9253

Reversing Contactor

BH 9253

Contacts

Nominal voltage

Rated continuous current

Switchover delay

Approval

Variant

  • 0057946
  • BH9253.11 AC400V 12A 100MS
The reversing contactor BH 9253 is used to reverse the direction of 3-phase asynchronuos motors... more

Product description

The reversing contactor BH 9253 is used to reverse the direction of 3-phase asynchronuos motors by switching 2 phases. An electrical interlocking disables the control of both directions at the same time. The reversing contactor has a short on and off delay time. When reversing the phases a switchover delay is guaranteed. To protect the power semiconductors the unit incorporates temperature monitoring. When overtemperature is detected the power semiconductors swith off and an output relay as well as a red LED is activated. This state is stored. When the temperature is back to normal the semiconductors can be activated again by switching off and on the control voltage.

Technical specifications

On/Off Input Control: AC, AC/DC
Widths: 45, 67,5, 112,5 mm
1-/2-/3-polig: 3-polig
Load current up to: 20 A
Load voltage: 3AC 24 - 480 V
Enclosure design: Switch cabinet
Type: BH 9253
Signalling output: +
Temperature monitoring: +
Approvals: UL

Features

  • According to IEC/EN 60 947-1, IEC/EN 60 947-4-2
  • Switching at zero-crossing
  • To reverse 3 phase asynchronuos motors up to
    5.5 kW / 400 V (7.5 HP / 460 V)
  • Electrical interlocking of both directions
  • Temperature monitoring to protect the power semiconductors
  • Measured nominal current up to 20 A
  • LEDs for status indication
  • Galvanic separation between control circuit and power circuit
  • 45 mm; 67.5 mm; 112.5 mm width